Nyeste anskaffelser av NTNU (The Norwegian University of Science and Technology)
2016-10-29High temperature thermogravimetric furnace (NTNU (The Norwegian University of Science and Technology))
The procurement will be of a thermogravimetric furnace in controlled atmosphere. The furnace must be able to liquefy different types of ore in a crucible. The furnace must operated with gas power throughout the furnace with reduced and inert atmosphere, and measure the weight-loss of the test.
For further requirements of the objective, please see the technical requirement specification in annex 1 (see attachment).
Vis anskaffelsen »
2016-10-27PDI Phase Doppler Interferometer (NTNU (The Norwegian University of Science and Technology))
NTNU's Institute for Chemical Process Technology http://www.ntnu.edu/chemeng would like to procure equipment for measuring drop distribution (size and amount) as well as its speed. We would like an instrument that can be used inside on a small scale laboratory testing stand, as well as with our outside pilot system. This includes a test section that includes the necessary optical access and cleaning/suction porting. Software to analyse and log data shall also be included/developed for this purpose.
Vis anskaffelsen »
2016-10-15Infra-red Camera (NTNU (The Norwegian University of Science and Technology))
A high-resolution infra-red camera for expanding the existing, and open new research programs for fatigue and fractures in advanced materials by using in-situ techniques. The camera will be used in combinations with other very sensitive observation techniques during dynamic testing in a frequency area from 0.1 to 10 Hz.
The Department of Engineering Design and Materials conducts competitive research on self-financed and external financed basis. The equipment at NTNU, the Department of Engineering Design …
Vis anskaffelsen » Nevnte leverandører:Telops France
2016-10-11Compact shelving for The Science Museum at NTNU (NTNU (The Norwegian University of Science and Technology))
The NTNU Science Museum, Section for natural history in Trondheim shall refurbish their store rooms in central Trondheim. Delivery and assembly of a complete store room fit out shall be offered, as described below.
In order for the Contracting Authority to assess the composition of the product/solution based on the tenderer's tender offer, we request sufficient documentation to best evaluate the offer(s), as well as a quotation on the offered system proposals for defined rooms with any proposals for …
Vis anskaffelsen »
2016-09-17Directional Solidification machine (NTNU (The Norwegian University of Science and Technology))
This is a voluntary notice in TED in order to reach the international market. The tender contest is published in accordance with part II.
Directional Solidification machine for metals:
Solidification and casting of metals alloys is an important research field at the Department for material science and engineering, NTNU. For further strengthening research and education in solidification, NTNU plans to procure a Directional Solidification machine. This machine should include a melting and casting system, a …
Vis anskaffelsen »
2016-09-09Partnering coordinator; The construction of ZEB Flexible Lab (NTNU (The Norwegian University of Science and Technology))
The contracting authority is planning the implementation of a ZEB Flexible Lab and is therefore requesting a partnering coordinator from a company with relevant knowledge about the requested discipline. 1 specific person shall be proposed.
The Project ZEB Flexible Lab is assumed implemented as a partnering model based on a process model from the Construction Industry Institute (CII).
See the attached tender documentation with associated attachments for detailed description.
Vis anskaffelsen »
2016-09-03Framework agreement for freight (NTNU (The Norwegian University of Science and Technology))
The procurement concerns outgoing freight of parcel post, general cargo and letters, both normal freight and express. Both domestic and overseas dispatch and customs clearance of imported goods. The tenderer must be able to deliver all of the categories, i.e. not only parts of the competition/categories.
NTNU wants to have the most cost effective and environmentally friendly post service possible. Therefore we want a Tenderer who can help us find the best solution for NTNU. It is important to use that …
Vis anskaffelsen »
2016-08-26The procurement of High throughput genotyping system (NTNU (The Norwegian University of Science and Technology))
The requested high throughput genotyping system must be a fully integrated system, suitable for efficient and reliable genotype sampling from numerous non-model types on 10 to hundreds of Single Nucleotide Polymorphism, (SNP's). The input material for the system shall be DNA and the output from the system must be data files with individual genotypes for each SNP. The genotyping ‘Call rates’ must be high, both in relation to samples ‘called’ and SNP's ‘called’, as well as high genotyping accuracy and …
Vis anskaffelsen »
2016-08-19High speed camera (NTNU (The Norwegian University of Science and Technology))
The Norwegian University of Science and Technology (NTNU), the Institute for Product Development and Materials (IPM), teaches in technological subjects both on lower degree levels, as well as on master and PhD levels. The existing teaching system is organised as project assignments and as problem based teaching where the students are analysing problems and propose solutions, as well as modelling. The assignments are defined by industrial establishments and through the Institute's research projects. IPM …
Vis anskaffelsen »
2016-07-11Instrumentation for an electro laboratory (NTNU (The Norwegian University of Science and Technology))
As a part of the master degree scheme, our students have some basic subjects in electronic circuit engineering and electronics during the 2 1year of the master degree scheme. These subjects are taught in our largest laboratory which is equipped with 88 laboratory worktops with necessary equipment. The laboratory has capacity for 300 students simultaneously.
Vis anskaffelsen »
2016-06-28Remote Operating Vehicle — ROV (NTNU (The Norwegian University of Science and Technology))
Applied Underwater Robotics Lab (AUR-Lab) shall procure a new remote operating underwater vessel (ROV) for research. The ROV ought to be an electrical observation ROV, see the Norwegian Standard U102. The ROV shall mainly be used on NTNU's research vessel ‘Gunnerus’, but it shall be used down to 3 000 m depth, but is also ought to be a good and mobile platform for research in shallow water along the coast and in the fjords. It will also be used in polar environments, from ice-breakers and in tropical …
Vis anskaffelsen »
2016-06-14Equipment for DBS (Deep Brain Stimulations) (NTNU (The Norwegian University of Science and Technology))
Procurement of a new DBS system that shall contribute to maintaining a treatment alternative for advanced Parkinsons disease, which has been offered at St. Olavs Hospital HF since 2001. During DBS surgery, micro electrode recordings and test simulation of deep structures in the brain are carried out in order to optimise the correct placement of the last electrode in accordance with the gold standard in the field. The DBS system that is currently used in Trondheim is now more than 10 years old and it …
Vis anskaffelsen »
2016-05-19Test station for Direct-Methanol Fuel-Cells (DMFC) (NTNU (The Norwegian University of Science and Technology))
The Norwegian University of Science and Technology (NTNU)/Institute of Material Technology, invites you to submit a tender for a test station for direct methanol fuel cells (DMFC).
The equipment shall allow, at a minimum, the user to carry out the following general operations:
— Connect to a single DMFC sized 5 x 5 cm2 to a controlled load in low-effect area (typically <100 W).
— Flow of fuel and oxidants to the cell under pressure, temperature and flow control and monitor the operational parameters such …
Vis anskaffelsen »
2016-05-13University distributed analytical robot infrastructure (NTNU (The Norwegian University of Science and Technology))
The results achieved through the procurement of the described equipment will be used to set up modular liquid handling systems that have analytical abilities. The instruments will be used to automate the generation of liquid that includes chemicals and/or micro-organisms. Analytical modules with interface with the liquid handling system can monitor the concentration of protons (pH), oxygen and CO from fluids. In addition the instruments will also be used to automate molecular biological procedures, e.g. …
Vis anskaffelsen »
2016-05-04X-ray high-flux source (NTNU (The Norwegian University of Science and Technology))
The procurement includes an x-ray ‘high flux’ source. The source shall be used for providing radiation for a number of material science and physical experiments in a research laboratory at a university.
The source will primarily be used for spreading and diffraction experiments, in order to characterise how the structure function in both organic and inorganic materials, both in natural condition and for analysing static material and structure as a reaction on different external loads/fields.
The source …
Vis anskaffelsen »
2016-04-13GD MS (NTNU (The Norwegian University of Science and Technology))
We wish to use the equipment/instrument to carry out quantitative chemical analyses of different materials. Our aim is primarily ‘solid state’ samples and the chemical analysis should give the levels a broad spectrum of elements present both as main impurities and trace elements. We have experience in using GDMS for trace element analyses in silicon for solar cells, and we wish to explore the possibilities of analysing other types of materials, both conductive and not conductive.
The procurement is not …
Vis anskaffelsen »
2016-04-07Storage box for batteries (NTNU (The Norwegian University of Science and Technology))
Procurement of Storage Box:
NTNU c/o the Institute for Material Technology shall procure a storage box for chemicals that are sensitive water and oxygen. It shall also be for assembling batteries in a dry environment.
See the contracting authority's requirement specifications (appendix 1) for further information.
Vis anskaffelsen »
2016-03-09High-flux x-ray source (NTNU (The Norwegian University of Science and Technology))
The procurement includes an x-ray ‘high flux’ source. The source shall be used for providing radiation for a number of material science and physical experiments in a research laboratory at a university.
The source will primarily be used for spreading and diffraction experiments, in order to characterise how the structure function in both organic and inorganic materials, both in natural condition and for analysing static material and structure as a reaction on different external loads/fields.
The source …
Vis anskaffelsen »
2016-01-26The Norwegian University of Science and Technology, Laboratory supplies, Framework agreement (NTNU (The Norwegian University of Science and Technology))
The framework agreements shall cover the need for laboratory supplies and they will have a total value of approx. 25 000 000 NOK per annum for all the institutions, with the approx. distribution:
— NTNU 19 000 000 NOK per annum.
— SINTEF 5 000 000 NOK per annum.
HINT and Universitetet i Nordland (from 1.1.2016 called Nord Universitet) 1 000 000 NOK per annum.
The contract will be valid for 3+1 years.
The contract is divided in 7 main categories and tenderers are allowed to request participation in the …
Vis anskaffelsen »
2015-11-18ANSK-0076-15 Framework agreements for fixtures and work chairs and accompanying services (NTNU (The Norwegian University of Science and Technology))
NTNU shall enter into framework agreements for fixtures with suppliers for the engineering design, delivery and assembly of fixtures for offices, teaching, research, canteen and communal areas. The chosen suppliers shall be total suppliers of fixtures and shall assist with furnishing the university's areas in accordance with the laws and regulations and for the benefit of both employees and students.
Annual volume: Approximately 18 000 000 NOK.
Up to 3 framework agreements (Trondheim, Ålesund, Gjøvik) …
Vis anskaffelsen » Nevnte leverandører:Lindbak
2015-11-18Furnace for refining and casting (NTNU (The Norwegian University of Science and Technology))
The procurement includes a refining and casting furnace in a controlled environment. The oven must be able to make silicon liquid inside a crucible. It must be possible to add alloying constituents in the melting process during the experiment. During the refining process the crucible must be ‘Stirred’. After refining the melting, the substance shall be casted and direction solidified. See the attached tender documents for further descriptions and requirements.
Vis anskaffelsen »
2015-11-11Archeo-botanical analyses Ørlandet (NTNU (The Norwegian University of Science and Technology))
NTNU The Science Museum, Section for Archaeology, is responsibility for archaeological digs in Mid Norway in accordance with the Cultural Memorial Act. The digs at Ørland fighter jet base have uncovered settlement traces from the iron age over an area of approximately 90 000 m. Samples have been gathered from the examined structures for analysing macro fossils, soil chemistry and C14-dating of archaeological contexts. In this procurement we shall get the necessary analyses of these samples.
Vis anskaffelsen »
2015-11-11Framework agreement, Car hire (NTNU (The Norwegian University of Science and Technology))
This tender notice shall result in a framework agreement with a provider of car hire services in Norway. The hired cars shall be used by employees on duty, and applies to both short-term and long-term hire. Cars/goods vans for use in fieldwork are also required.
The hired cars are to be used in connection with official journeys and various forms of utility transport all over Norway. The requirements will vary in relation to the size of the cars and goods vans, and the deliveries may take place all over …
Vis anskaffelsen »