Nyeste anskaffelser av NTNU [The Norwegian University of Science and Technology]
2016-12-19Transport services for HUNT4 (the HUNT Study — a longitudinal population health study in Norway) (NTNU [The Norwegian University of Science and Technology])
The contract includes transport services for biological samples (blood, spit, urine and faeces samples), as well as activity sensors collected at the HUNT's field stations in Levanger, as well as transportation of consumables from the HUNT research centre to the field stations. The transport shall mainly be provided during evenings, Mondays to Tuesdays, from September 2017 until February 2019. The transport shall be provided after opening hours at the field stations. The collection time can vary from …
Vis anskaffelsen »
2016-12-15NTNU Campus development — Mapping work patterns as well as concept development for areas (NTNU [The Norwegian University of Science and Technology])
NTNU has several sub-projects under the project NTNU's co-location of its campus in Trondheim.
Mapping activity and work patterns and concept development for areas included in the Master Plan for the campus in Trondheim, which consists of 3 sub-projects:
— Mapping work patterns and activities and concept development for areas (this assignment);
— General physical plan;
— Subject location in the co-located campus.
The assignment will include varied assignments, which shall provide a basis for a room and …
Vis anskaffelsen »
2016-12-15ZEB Flexible Lab (NTNU [The Norwegian University of Science and Technology])
NTNU, c/o the Faculty for Engineering and Technology (IVT) and the Faculty for Architecture and Visual Art (AB), intends, together with SINTEF, to construct and operate a ZEB Flexible Lab at Gløshaugen in Trondheim. The project owner is IVT.
The building shall be constructed as a part of the buildings at Høgskoleringen 7.
Through the research centre Zero Emission Buildings (ZEB), NTNU and SINTEF have significantly extended their facilities in recent years for research on zero emission buildings and …
Vis anskaffelsen »
2016-11-29Thin film NP laboratorie_PLD_sputtering combined system (NTNU [The Norwegian University of Science and Technology])
The contracting authority would like tenders for a system that will be used for the design and synthesis of advanced nano materials and nano composites for a broad spectrum of nano technology programmes.
The system consists of two consecutive vacuum chambers. The first chamber is an aggregating zone where 3 sputtering targets can be simultaneous or separate DC sputtering in an Ar-atmosphere. The three magnetrons shall be independently inspected. Within this aggregate zone, a cluster core forms in an …
Vis anskaffelsen »
2016-11-23Equipment for an electric power engineering laboratory (NTNU [The Norwegian University of Science and Technology])
NTNU shall resume the electric power engineering study in Ålesund. The study has been closed for approx. 15 years. The existing laboratory shall therefore be upgraded. The investments will be coordinated with our joint venture partner campus Vocational College in Ålesund. The study shall include tasks for the subject areas electric machines, power electronics and electric power systems. All subjects are taught for achieving bachelor level or lower.
Vis anskaffelsen »
2016-11-21Battery testing system (NTNU [The Norwegian University of Science and Technology])
NTNU shall procure a one-1 battery testing system with all required hardware and software. The battery testing system shall be used for research, education, consultancy services for the industry for energy storage for vessels, vehicles, grid networks, solar energy, wind power systems, etc.
See the attached tender documentation for a detailed description.
Vis anskaffelsen »
2016-11-19Scanning Electron Microscope with EDS (NTNU [The Norwegian University of Science and Technology])
The contracting authority intends to procure a Scanning Electron Microscope (SIM) for building and construction materials. The SEM shall be procured with EDS for element analysis.
The SEM laboratory will be dedicated and optimised for the different research assignments in the relevant fields, education of students and, in this way, particular focus on research based education. The SEM laboratory should enable studies of building and construction materials including larger samples and electrically …
Vis anskaffelsen »
2016-10-26System for syllabus lists (NTNU [The Norwegian University of Science and Technology])
The procurement of a system for upholding, maintenance and availability of syllabus lists. The system shall contribute to improved quality of the syllabus lists, simplified work-flow for those preparing the lists, fewer double payments to the resources and improved employment of the current resources.
Vis anskaffelsen »
2016-09-30Flowcytometer — cell sorterer (NTNU [The Norwegian University of Science and Technology])
The Institute for Cancer Research and Molecular Medicine at the Medical Faculty (NTNU) is announcing the procurement of a compact flow cytometry cell sorter integrated in a bio-safety level II cabinet, installed in a BSL 3 laboratory (Bio-Safety level 3).
The samples that shall be sorted and analysed include:
fluorochrome coloured and/or fluoridising protein transfected;
— living and fixed mammal cells;
— bacteria;
— virus;
— biopolymers;
— various solid monodisperse particles.
The instrument will mainly …
Vis anskaffelsen »
2016-09-27Maskless aligner (NTNU [The Norwegian University of Science and Technology])
We would like a quick system that can reveal photo resists on a number of bases that span from, e.g. 6 inch wafers to small samples. At the moment there are two alternatives to pattern a large selection of resistance in our clean room:
1. By using a mask aligner, which requires a photo mask to be designed and then sent to an external company for fabrication. The processing time for this alternative is normally 1 to 2 weeks, as the companies are mainly located abroad. As the design functions on the mask …
Vis anskaffelsen »
2016-09-16Frozen ground triaxial unit (NTNU [The Norwegian University of Science and Technology])
The Geotechnical group at the University is currently involved in a project with a focus on the mechanical behaviour of frozen ground. The most important part of the research is the theoretical component, but laboratory testing is always necessary. The Contracting Authority plans to purchase a frozen ground triaxial unit with a temperature controlling system. All parts of the equipment, including washer and electronic units must be able to function in negative temperatures.
See appendix 1 for further …
Vis anskaffelsen »
2016-09-13High temperature rotary furnace (NTNU [The Norwegian University of Science and Technology])
This is a voluntary notice in TED in order to reach the international market. The tender contest is published in accordance with part II.
NTNU, c/o the Department of Engineering Design and Materials conducts i.a research and development of metal production.
The metal production takes place at very high temperatures, and the raw materials that are feed in the production furnaces undergo various phase changes and thermic strains on their way to finished metal. By studying these changes in the raw …
Vis anskaffelsen »
2016-09-072 high speed cameras (NTNU [The Norwegian University of Science and Technology])
2 black and white high speed cameras (HSC) are required for single oil drop breakage experiments in water phase by high speed image analysis. The experimental setup consists of a vertical squared channel of dimensions 3 cm x 3 cm x 120 cm in which the water flows with a cross-sectional average velocity in the range 0,5-5 m/s. Single drops are injected into the water flow and eventual breakage events are analysed. The price should include optics covering a measuring volume (Field of view (FOV)) with a …
Vis anskaffelsen »
2016-07-12NTNU Framework Agreement Training and Pre-Award Consultancy (NTNU [The Norwegian University of Science and Technology])
The participation in Horizon 2020 is given top priority at NTNU and consequently there is a separate support team at NTNU with operative EU consultants, at each of the faculties, co-ordinated by the Vice-chancellor's staff for research.
External consultancy; guidance, evaluation and training are offers to NTNU's personnel and the objective is that these service shall contribute to significant quality improvement of proposals to Horizon 2020, other related programmes, and major national programmes, that …
Vis anskaffelsen »
2016-06-24Framework agreement Steel and metals (NTNU [The Norwegian University of Science and Technology])
Framework agreement for the delivery of Steel and metals to NTNU and SINTEF. The steel and metals shall be used in connection with building of equipment for education and research.
The contract includes most products made of regular steel, acid resisting and stainless steel, tool steel, and high alloy steel qualities. Aluminium in various alloys, brass and copper are also included in the contract.
Vis anskaffelsen »
2016-06-23STM electronics (NTNU [The Norwegian University of Science and Technology])
NTNU has at present 3 STM instruments; 1 Omicron STM 1 instrument, 1 Omicron VT — STM and one STM built by NTNU. NTNU wishes to procure a new and modern controller for our STM 1. This will provide total functionality for the instrument. The new electronics shall mainly be used with STM-1, but in order to ensure the flexibility in our laboratory set-ups, the controller shall also have the possibility to control the other STM instruments as well. STM 1 is mainly used for studying model systems for …
Vis anskaffelsen »
2016-06-14Framework agreement, Fossil Material, NTNU University Museum (NTNU [The Norwegian University of Science and Technology])
The Department of Archaeology and Cultural History executes between 10 and 20 archaeological excavations per annum. Approx. 2 — 5 annual excavations involve examinations of prehistoric agricultural settlements. Fossil plant materials in postholes, fireplaces, cooking pits, cultural layers, agricultural layers and other archaeological contexts, are discovered during these excavations. The volume of macrofossil plant residues for analysing is approx. 50 samples in a ‘low’ year, and approx. 400 samples in a …
Vis anskaffelsen »
2016-06-08Equipment for carrying out ergo spirometry (NTNU [The Norwegian University of Science and Technology])
We would like a system for carrying out ergo spirometry that is easy to transport from place to place. The equipment must be easily packed into boxes and quickly packed and it shall be ready for testing. We need flexible options within sport and vocational medicine.
The equipment shall preferably be delivered with a mixing chamber as an alternative. The system shall be validated with similar systems (e.g. METAMAX II, Jaeger oxycon pro or Douglas bag), even with high ventilation (≥ 200 L / min-1). The …
Vis anskaffelsen »
2016-05-10Focused Ion Beam instrument (FIB) and Scanning Electron Microscope (SEM) (NTNU [The Norwegian University of Science and Technology])
FIB-SEM:
NTNU NanoLab is the core facility in NorFab for high resolution processing and characterisation, and the proposed FIB and SEM will primarily support high education, research and development for NorFab users. The objective of this procurement is to meet the needs of our NanoLab users. FIB-SEM will complete our current FIB-SEM system, now that the time on the instrument has increased to 3 500 hour per year and the demand is expected to increase.
Within the Norwegian cleanroom network Norfab, the …
Vis anskaffelsen »
2016-03-23Crimp and stress test machine (NTNU [The Norwegian University of Science and Technology])
The announcement concerns the procurement of a test machine suitable for determining of creep and stress relaxation properties, primarily of aluminium alloy, under increased temperature and up to 5 kN. Necessary equipment included in the procurement, will be extensometer(s) and temperature controlled chambers. Above all we want a multi axis test machine, but if this is too expensive compared to a 1-axle test machine, we also request and will assess tender offers on a 1-axle test machine.
For further …
Vis anskaffelsen »
2016-03-08100 kN Servo Hydraulic Testing Machine (NTNU [The Norwegian University of Science and Technology])
The objective of the procurement is the purchase of a 100 kN Servo Hydraulic Testing Machines suitable for determining mechanical properties, primarily of metals under cyclic loading (fatigue tests) and statistical tests such as tensile tests, compression tests, 3-point bending and fracture toughness testing. Some of the tests with low/high temperature and some at comparatively high speed. Required additional equipment will be temperature chambers, extensometers and hydraulic grips.
For further …
Vis anskaffelsen »
2016-02-17Scratch tester (NTNU [The Norwegian University of Science and Technology])
We are seeking a scratch tester that can measure scratch resistance, adhesion, ‘self healing’, friction and scratch hardness properties. Relevant materials are metals, alloys such as steel, silicon or titanium, as well as ceramic materials, glass and composites. These can also be coated with different types of materials (organic or inorganic, hard or soft) and with varying thickness. The equipment must measure these qualities in an exact and scientific manner. Both progressive scratch tester and constant …
Vis anskaffelsen »
2016-02-12Two photon microscope and infrared femtosecond laser (NTNU [The Norwegian University of Science and Technology])
NTNU invites tenderers to submit a tender for an ‘in vivo’ 2 photon microscope to carry out ‘in vivo’ picture processing experiments in real time, equipped with an infrared femtosecond laser. The 2 photon microscope system will be placed in the Department for Comparative Medicine, St. Olavs Hospital. There will be a multi-user system for intravital picture processing and taking pictures of thick tissue samples.
The 2 photon microscope must be versatile and have an open design in order to allow easy …
Vis anskaffelsen »
2016-02-04Procurement of Spark Plasma Sintering System (SPS) (NTNU [The Norwegian University of Science and Technology])
The objective of the procurement is that the requested equipment shall allow the user to at least perform the following general operations:
Perform Spark Plasma Sintering of a long range of materials, including metals, ceramics, nano materials, composites and functionally graded materials. The equipment should allow Spark Plasma Sintering with high vacuum up to at least 2 000 °C for samples ≤ 3 cm in diameter. Sintring pressure should be in the area of 2 kN to a minimum of 250 kN. Evacuation of the …
Vis anskaffelsen »
2016-01-20Procurement of a Scanning probe microscope (NTNU [The Norwegian University of Science and Technology])
The Inorganic Materials and Ceramics Research Group at the Department of Materials Science and Engineering at NTNU requires a computer controlled high-resolution scanning proble imaging system (scanning probe microscope — SPM).
We plan to acquire a state-of-the-art computer controlled SPM including controller and software. The system will be used for studying electronic and magnetic nanoscale properties of functional oxides and, besides providing atomic resolution in AFM mode, should support advanced …
Vis anskaffelsen »