Procurement of Spark Plasma Sintering System (SPS)

NTNU [The Norwegian University of Science and Technology]

The objective of the procurement is that the requested equipment shall allow the user to at least perform the following general operations:
Perform Spark Plasma Sintering of a long range of materials, including metals, ceramics, nano materials, composites and functionally graded materials. The equipment should allow Spark Plasma Sintering with high vacuum up to at least 2 000 °C for samples ≤ 3 cm in diameter. Sintring pressure should be in the area of 2 kN to a minimum of 250 kN. Evacuation of the sintring chamber to high vacuum should be possible. The equipment should be easy to operate and equipped with the necessary emergency stop and safety systems.
For further procurement requirements, please see the technical specification in annex 1 (see annex).

Frist

Fristen for mottak av tilbud var 2016-03-14. Anskaffelsen ble publisert 2016-02-04.

Hvem? Hva? Hvor?
Anskaffelseshistorikk
Dato Dokument
2016-02-04 Kunngjøring av konkurranse
Kunngjøring av konkurranse (2016-02-04)
Gjenstand
Anskaffelsens omfang
Tittel: Ovens
Antall eller omfang:
The Contracting Authority emphasises that they shall procure one (1) device as described in the Contracting Authority's requirement specification (see annex).
Metadata for kunngjøring
Originalspråk: engelsk 🗣️
Dokumenttype: Kunngjøring av konkurranse
Kontraktens art: Varer
Forskrift: Det europeiske økonomiske samarbeidsområdet (EØS), med deltakelse av GPA-land
Felles innkjøpsordliste (CPV)
Kode: Ovner 📦

Prosedyre
Prosedyretype: Åpen anbudskonkurranse
Tilbudstype: Innlevering for alle delkontrakter
Tildelingskriterier
Det mest økonomisk fordelaktige tilbudet

Oppdragsgiver
Identitet
Land: Norge 🇳🇴
Type tildelende myndighet: Offentligrettslig organ
Navn på tildelende myndighet: NTNU [The Norwegian University of Science and Technology]
Postadresse: Jonsvannsveien 82
Postnummer: 7050
Poststed: Trondheim
Kontakt
E-post: terje.haarberg@ntnu.no 📧

Referanse
Datoer
Sendt dato: 2016-02-04 📅
Innleveringsfrist: 2016-03-14 📅
Publiseringsdato: 2016-02-06 📅
Identifikatorer
Kunngjøringsnummer: 2016/S 026-042858
OJ-S-utgave: 26

Gjenstand
Anskaffelsens omfang
Kort beskrivelse:
The objective of the procurement is that the requested equipment shall allow the user to at least perform the following general operations:
Perform Spark Plasma Sintering of a long range of materials, including metals, ceramics, nano materials, composites and functionally graded materials. The equipment should allow Spark Plasma Sintering with high vacuum up to at least 2 000 °C for samples ≤ 3 cm in diameter. Sintring pressure should be in the area of 2 kN to a minimum of 250 kN. Evacuation of the sintring chamber to high vacuum should be possible. The equipment should be easy to operate and equipped with the necessary emergency stop and safety systems.
Vis mer
For further procurement requirements, please see the technical specification in annex 1 (see annex).
Referansenummer: ANSK-0039-15
Utførelsessted
Hovedsted eller utførelsessted: NTNU Trondheim, Norway.

Juridisk, økonomisk, finansiell og teknisk informasjon
Vilkår for deltakelse
Egnethet til å utøve yrkesvirksomheten: See the requirement specifications.
Økonomisk og finansiell stilling: See the requirement specifications.
Minste nivå(er) av standarder: See the requirement specifications.
Teknisk og faglig kapasitet: See the requirement specifications.

Prosedyre
Tilbudets gyldighetsperiode: 2016-06-14 📅
Dato for åpning av tilbud: 2016-04-16 📅
Åpningssted: NTNU Trondheim, Norway.
Sted: NTNU Trondheim, Norway.
Språk
Språk: engelsk 🗣️
Andre språk: Norwegian.

Oppdragsgiver
Kontakt
Kontaktpunkt: Terje Haarberg
Navn: NTNU [The Norwegian University of Science and Technology]

Referanse
Datoer
Startdato: 2016-07-01 📅
Sluttdato: 2016-11-01 📅
Identifikatorer
Referansenummer tildelt av oppdragsgiver: ANSK-0039-15
Kilde: OJS 2016/S 026-042858 (2016-02-04)