Anskaffelser: Øvre Romerike Avfallsselskap IKS (ØRAS)

3 arkiverte anskaffelser

Historisk har leverandører til Øvre Romerike Avfallsselskap IKS (ØRAS) vært Papyrus Norge As og Scan Lux Flexible A/S.

Nyeste anskaffelser av Øvre Romerike Avfallsselskap IKS (ØRAS)

2013-10-25   The handling the residual fraction from household waste (Øvre Romerike Avfallsselskap IKS (ØRAS))
Bids are requested in the connection with the handling the residual fractions from household waste. The waste collected from the municipality and is sorted at the recycling station Dal Skog for further transportation for final disposal. The acquisition includes the (final) treatment of the waste and the transport from the plant. Refer to chapter 8(in the tender documents) for further details. ØRAS shall load the waste with its own wheel loader from the loading ramp at the Dal Skog recycling station. The … Vis anskaffelsen »
2012-03-30   Plastic sacks for plastic collection (Øvre Romerike Avfallsselskap IKS (ØRAS))
We would like tenders for sacks for collecting plastic. Type: tie sacks for collecting plastic with perforation holes. Number: 720 000 sacks. Voume: 140 litres. Format: 380x320xx1390 mm. Form: with tie handles. Colour sack: transparent without colour. Colour print: red 1 side. Material: LLE-PE or LD-PE, either using virgin raw materials or using a certain percentage of regranulate. Tolerance: Length and breadth +/-1 %, thickness +/-0.1 %. Thickness: 40 my. Packaging: Approx. 12 per carton. — Number of … Vis anskaffelsen »
Nevnte leverandører: Scan Lux Flexible A/S
2012-03-02   Purchase of green food waste bags (Øvre Romerike Avfallsselskap IKS (ØRAS))
The bags will be produced in LLD-PE and LD-PE, either by the use of virgin raw materials or by a certain percentage regranulate. The bags are basically manufactured with a thickness of 35 microns. We have long used bags of 28 microns. This has proven to be good, but it assumes that the quality requirements of Table 1 will be met. ØRAS want to minimize the consumption of plastic bags. Table 1. Quality parameters standard machine direction cross direction. Impact strength (g) ASTM D1709> 85 g. Tear … Vis anskaffelsen »
Nevnte leverandører: Papyrus Norge As