Turnkey contract Sunndal helsetun

Sunndal kommune

The New Sunndal Helsetun shall be constructed on the existing health tunnel site at Sunndalsøra in Sunndal municipality. The new health centre shall have 64 institution places, 16 short-term places and 32 sheltered accommodation flats. The site is located just east of the city centre, by the church, north of national road 70. The project is divided into two construction stages, due to the simultaneous operation of the existing health centre. The project also includes institutional kitchen, canteen, physiotherapy and doctor, as well as the office area for the home care service and administration.

Frist

Fristen for mottak av tilbud var 2025-12-12. Anskaffelsen ble publisert 2025-10-23.

Hvem?

• Sunndal kommune

Hva?

Hvor?

• Vestlandet › Møre og Romsdal

Anskaffelseshistorikk

Dato	Dokument
2025-10-23	Kunngjøring av konkurranse
2025-11-14	Kunngjøring av konkurranse
2025-12-03	Kunngjøring av konkurranse
2025-12-08	Kunngjøring av konkurranse

Kunngjøring av konkurranse (2025-10-23)
Gjenstand
Anskaffelsens omfang
Tittel: Turnkey contract Sunndal helsetun
Referansenummer: 25/02928
Kort beskrivelse:

Kontrakttype: Bygge- og anleggsarbeid
Produkter/tjenester: Deler av eller komplette byggekonstruksjoner samt anleggsarbeider 📦
Beskrivelse
Intern identifikator: 25/02928
Mengde: 12500 kvadratmeter
Tilleggsprodukter/-tjenester:

Arkitekt- og relaterte tjenester 📦

Bygge- og anleggsrelaterte tjenesteytelser 📦

Byggearbeid 📦

+ 7 til

Byggningsinnstallasjonsarbeid 📦

Byplanleggings- og landskapsarkitekttjenester 📦

Ferdigstillende bygningsarbeid 📦

Ingeniør- og byggningsarbeid 📦

Ingeniørtjenester 📦

Nedrivning av bygninger og jordarbeid 📦

Takarbeid og annet spesialarbeid innen for Bygge- og anleggsfagene 📦

Hovedsted eller utførelsessted:

The contract includes both Ringvegen 13 and Ringvegen 15 and it shall be constructed right up to Ringvegen 17.

Postadresse: Ringvegen 13
Postnummer: 6600
By: Sunndalsøra
Land: Norge 🇳🇴
Utførelsessted: Møre og Romsdal 🏙️
Varighet
Startdato: 2026-01-27 📅
Sluttdato: 2029-06-29 📅
Informasjon om opsjoner
Opsjoner ✅
Beskrivelse av opsjoner:

Option A: Expansion of the first floor with four additional resident rooms, connected to the short-term department on the second floor. Cost implications for construction in phase 2 must be included. Option B: Building A consists of four wings connected to a central core. Cost implications must be included for executing the wings with straight corridors of 1.8 m free width instead of sloped corridors. Option C: Cost implications for changing rounded outer corners at the end of each wing in Building A to angled corners. Option D: Cost implications for changing rounded inner corners between wings in Building A to angled corners. Option E: Alternative execution of canopies on the north side of the glass corridor between Building A and B. Canopies shall be mounted using hanging bars on walls and glass façade. Adjustments to façade profiles and steel reinforcements must be included. All exposed metal shall be painted in a freely chosen RAL colour. Option F: Cost implications for changing rounded internal walls to straight walls with angled corners. Construction shall match other internal walls. Option G: Cost implications for using industrial parquet flooring instead of laminate (Polyflot Ekspona Commercial or equivalent) in all common living rooms. Option H: Cost implications for changing the roof of Building A from sloped to flat. Drainage slope shall be handled in the insulation layer. The technical room in the attic shall be externally clad. Roofing shall be asphalt roll material. Internal downpipes shall be included. Option I: Alternative roofing for Building A with double-folded, fire-impregnated wooden roof (e.g., Talgø Concise or equivalent). The roof shall have a smooth, homogeneous surface with narrow joints. Colour and surface treatment are freely chosen. Electrical installations and under-roof structures are included. Option J: Groundwater measurements from June 2025 show levels below 5 m during a dry period. If long-term measurements confirm groundwater below basement level, a non-waterproof basement may be considered. Cost reduction for this and alternative execution with slab-on-ground, point foundations, and strip foundations shall be priced. Lift shafts must be executed with waterproof pits. Option K: All resident bathrooms are drawn at 6.4 m². The turnkey contractor shall price an option for redesigning all bathrooms. Option L: A two-sided natural stone wall with integrated wooden benches shall be established at the entrance area. The wall shall be built with a reinforced concrete core and a top plate glued with frost-resistant cement-based adhesive. Bench height shall not exceed 0.45 m. The same natural stone shall be used as a line element flush with the terrain to allow surface water to flow into vegetation areas. Option M: Zones shall be established with fully cast rubber fall surfaces that meet universal design (UU) requirements. Complete delivery of coverings is included. Thickness shall be adapted to the fall height of each apparatus. Fibre cloth shall be used if needed. Option N: Complete delivery of a flagpole including foundations and fasteners. The flagpole shall be 14 m high. Option O: Electric heating cables in door openings to prevent icing and ensure door functionality in winter. Heating cables in gutters and roof drains to prevent ice formation and sewage blockage. Option Q: The building may be equipped with solar panels for self-production on south- and west-facing roof areas.

Beskrivelse av opsjoner

Option A: Expansion of the first floor with four additional resident rooms, connected to the short-term department on the second floor. Cost implications for construction in phase 2 must be included.
Option B: Building A consists of four wings connected to a central core. Cost implications must be included for executing the wings with straight corridors of 1.8 m free width instead of sloped corridors.
Option C: Cost implications for changing rounded outer corners at the end of each wing in Building A to angled corners.
Option D: Cost implications for changing rounded inner corners between wings in Building A to angled corners.
Option E: Alternative execution of canopies on the north side of the glass corridor between Building A and B. Canopies shall be mounted using hanging bars on walls and glass façade. Adjustments to façade profiles and steel reinforcements must be included. All exposed metal shall be painted in a freely chosen RAL colour.
Option F: Cost implications for changing rounded internal walls to straight walls with angled corners. Construction shall match other internal walls.
Option G: Cost implications for using industrial parquet flooring instead of laminate (Polyflot Ekspona Commercial or equivalent) in all common living rooms.
Option H: Cost implications for changing the roof of Building A from sloped to flat. Drainage slope shall be handled in the insulation layer. The technical room in the attic shall be externally clad. Roofing shall be asphalt roll material. Internal downpipes shall be included.
Option I: Alternative roofing for Building A with double-folded, fire-impregnated wooden roof (e.g., Talgø Concise or equivalent). The roof shall have a smooth, homogeneous surface with narrow joints. Colour and surface treatment are freely chosen. Electrical installations and under-roof structures are included.
Option J: Groundwater measurements from June 2025 show levels below 5 m during a dry period. If long-term measurements confirm groundwater below basement level, a non-waterproof basement may be considered. Cost reduction for this and alternative execution with slab-on-ground, point foundations, and strip foundations shall be priced. Lift shafts must be executed with waterproof pits.
Option K: All resident bathrooms are drawn at 6.4 m². The turnkey contractor shall price an option for redesigning all bathrooms.
Option L: A two-sided natural stone wall with integrated wooden benches shall be established at the entrance area. The wall shall be built with a reinforced concrete core and a top plate glued with frost-resistant cement-based adhesive. Bench height shall not exceed 0.45 m. The same natural stone shall be used as a line element flush with the terrain to allow surface water to flow into vegetation areas.
Option M: Zones shall be established with fully cast rubber fall surfaces that meet universal design (UU) requirements. Complete delivery of coverings is included. Thickness shall be adapted to the fall height of each apparatus. Fibre cloth shall be used if needed.
Option N: Complete delivery of a flagpole including foundations and fasteners. The flagpole shall be 14 m high.
Option O: Electric heating cables in door openings to prevent icing and ensure door functionality in winter. Heating cables in gutters and roof drains to prevent ice formation and sewage blockage.
Option Q: The building may be equipped with solar panels for self-production on south- and west-facing roof areas.

Tildelingskriterier
Pris ✅
Pris (vekting): 60
Kvalitetskriterium (navn): Quality - Implementation competence
Kvalitetskriterium (vekting): 40
Tittel
Identifikasjonsnummer for delkontrakt: LOT-0000

Prosedyre
Prosedyretype
Åpen anbudskonkurranse ✅
Rettslig grunnlag: Direktiv 2014/24/EU
Hovedtrekk ved prosedyren:

The procurement is for the demolition of the existing health centre, detailed engineering design services and the complete delivery of all construction works to completed buildings, including outdoor works. Both the demolition and the construction of the new building are divided into two construction stages, both of the construction phases are part of the procurement.

Rettslig grunnlag:

The procurement will be carried out in accordance with the Public Procurement Act of 17. June 2016 (LOA) and the Public Procurement Regulations (FOA) FOR 2016-08-12-974. Parts I and part III. The contract will be awarded in accordance with the open tender contest procedure, cf. FOA § 13-1(1).

Administrativ informasjon
Frist for mottak av tilbud eller forespørsler om deltakelse: 2025-12-12 13:00:00 📅
Vilkår for åpning av tilbud: 2025-12-12 13:00:00 📅
Språk som tilbud eller forespørsler om deltakelse kan sendes inn på: norsk 🗣️
Minste tidsramme som tilbyderen må opprettholde tilbudet i: 117 dager
Anbudsvilkår
Tilbydere kan levere mer enn ett tilbud
Avansert eller kvalifisert elektronisk signatur eller segl (som definert i forordning (EU) nr. 910/2014) er påkrevd
Åpningsdato: 2025-12-12 13:00:00 📅
Elektronisk fakturering: Påkrevd
Elektronisk bestilling vil bli brukt ✅
Elektronisk betaling vil bli brukt ✅
Frist for å be om tilleggsinformasjon: 2025-12-05 13:00:00 📅
Tilleggsinformasjon: The contracting authority follows FOA § 23-5 (1) and (2).
Tildelingskriterier
Vekttype: Vekting (prosent, eksakt)

Oppdragsgiver
Navn og adresser
Navn: Sunndal kommune
Nasjonalt registreringsnummer: 964981604
Postadresse: Postboks 94
Postnummer: 6601
Poststed: Sunndalsøra
Region: Møre og Romsdal 🏙️
Land: Norge 🇳🇴
Kontaktpunkt: Sigbjørn Utne
E-post: sigbjorn.utne@sunndal.kommune.no 📧
Telefon: +47 71699000 📞
Faks: +47 71699001 📠
URL: http://www.sunndal.kommune.no 🌏
Adresse til kjøperprofilen: https://www.sunndal.kommune.no/ 🌏
Type oppdragsgiver
Offentligrettslig organ
Hovedaktivitet
Helse
Informasjon om felles anskaffelse
Kontrakten tildeles av en sentral innkjøpsenhet ✅
Kommunikasjon
URL for dokumenter: https://permalink.mercell.com/267866767.aspx 🌏
Deltakelses-URL: https://permalink.mercell.com/267866767.aspx 🌏
Dokument-ID for skattelovgivning: FiscalDocID1
Dokument-ID for miljølovgivning: EnvDocID1
Dokument-ID for arbeidslovgivning: EmplDocID1
Elektronisk innsending: Påkrevd

Utfyllende informasjon
Organ ansvarlig for meklingsprosedyrer
Navn: Nordmøre og Romsdal tingrett
Nasjonalt registreringsnummer: 935365120
Avdeling: Molde
Postadresse: Julsundvegen 9
Postnummer: 6412
Poststed: Molde
Region: Møre og Romsdal 🏙️
Land: Norge 🇳🇴
Kontaktpunkt: Nordmøre og Romsdal Tingrett
Telefon: 72 58 22 10 📞
Klageinstans
Samme som: Organ ansvarlig for meklingsprosedyrer
Tjeneste hvor informasjon om klageprosedyren kan innhentes
Navn: Advansia AS
Nasjonalt registreringsnummer: 883889762
Postadresse: Øvre veg 24
Postnummer: 6415
Kontaktpunkt: Ivar Sæter
E-post: ivar.saeter@advansia.no 📧
Telefon: 91190207 📞
URL: https://www.advansia.no/ 🌏
Klageprosedyre
Presis informasjon om frister for klageprosedyrer: The waiting period expires 02.02.2026.
Informasjon om elektroniske arbeidsflyter
Elektronisk fakturering vil bli akseptert
Kunngjøringsinformasjon
Foretrukket publiseringsdato: 2025-10-24Z 📅
Kilde: OJS 2025/S 205-704497 (2025-10-23)

Kunngjøring av konkurranse (2025-11-14)

Utfyllende informasjon
Kunngjøringsinformasjon
Foretrukket publiseringsdato: 2025-11-15Z 📅

Endringer
Tekst som skal korrigeres i den opprinnelige kunngjøringen
Seksjonsnummer: PROCEDURE
Annen tilleggsinformasjon

The following documents have been updated/added to the notice: Remuneration form Drawings for existing buildings Area form The tender documentation part 1 The tender documentation part 2 Requirement specifications: Climate and Environment.

Hovedårsak til endring: Informasjon oppdatert
Informasjon om endringer
Identifikator for endret kunngjøringsversjon: f4789338-381c-4484-9555-0cdf3aaa9f85-01
Kilde: OJS 2025/S 222-763643 (2025-11-14)

Kunngjøring av konkurranse (2025-12-03)
Prosedyre
Prosedyretype
Rettslig grunnlag:

Updating of documents. Tender deadline update

Administrativ informasjon
Frist for mottak av tilbud eller forespørsler om deltakelse: 2025-12-19 11:00:00 📅
Vilkår for åpning av tilbud: 2025-12-19 11:00:00 📅
Anbudsvilkår
Åpningsdato: 2025-12-19 11:00:00 📅

Utfyllende informasjon
Kunngjøringsinformasjon
Foretrukket publiseringsdato: 2025-12-04Z 📅

Endringer
Tekst som skal korrigeres i den opprinnelige kunngjøringen
Seksjonsnummer: PROCEDURE
Identifikasjonsnummer for delkontrakt: LOT-0000
Annen tilleggsinformasjon
Hovedårsak til endring: Informasjon oppdatert
Informasjon om endringer
Identifikator for endret kunngjøringsversjon: 6c2ca342-f31e-4bda-8780-18313ffb4fa2-01
Kilde: OJS 2025/S 235-809408 (2025-12-03)

Kunngjøring av konkurranse (2025-12-08)
Prosedyre
Prosedyretype
Rettslig grunnlag:

New document added: Enclose an environmental clearance description - simple arbeidsrapport.pdf This is also made available under additional information.

Utfyllende informasjon
Kunngjøringsinformasjon
Foretrukket publiseringsdato: 2025-12-09Z 📅

Endringer
Tekst som skal korrigeres i den opprinnelige kunngjøringen
Seksjonsnummer: PROCEDURE
Annen tilleggsinformasjon
Hovedårsak til endring: Informasjon oppdatert
Informasjon om endringer
Identifikator for endret kunngjøringsversjon: 529fdc92-9a3f-418e-b490-e79d913a1ae2-01
Kilde: OJS 2025/S 237-817203 (2025-12-08)

Nye anskaffelser i relaterte kategorier 🆕

Bygge- og anleggsvirksomhet (>20 nye anskaffelser)

Deler av eller komplette byggekonstruksjoner samt anleggsarbeider (>20)