Waterjet Cutter

Norges miljø- og biovitenskapelige universitet

The procurement consists of a 5-axle abrasive waterjet cutter for preparation of varying materials and thickness. The procurement will include all necessary components for utilisation of the machine (for example control panel, sand supply system, high pressure units, cooling units, software, etc.). The procurement will be installed in a separate room with limited space and the solution must therefore be adapted to this.

Frist

Fristen for mottak av tilbud var 2020-03-27. Anskaffelsen ble publisert 2020-02-27.

Hvem? Hva? Hvor?
Anskaffelseshistorikk
Dato Dokument
2020-02-27 Kunngjøring av konkurranse
2020-04-24 Kunngjøring om tildeling av kontrakt
Kunngjøring av konkurranse (2020-02-27)
Gjenstand
Anskaffelsens omfang
Tittel: Industrial robots
Referansenummer: 19/05521
Kort beskrivelse:
The procurement consists of a 5-axle abrasive waterjet cutter for preparation of varying materials and thickness. The procurement will include all necessary components for utilisation of the machine (for example control panel, sand supply system, high pressure units, cooling units, software, etc.). The procurement will be installed in a separate room with limited space and the solution must therefore be adapted to this.
Vis mer
Metadata for kunngjøring
Originalspråk: engelsk 🗣️
Dokumenttype: Kunngjøring av konkurranse
Kontraktens art: Varer
Forskrift: Det europeiske økonomiske samarbeidsområdet (EØS), med deltakelse av GPA-land
Felles innkjøpsordliste (CPV)
Kode: Industriroboter 📦
Utførelsessted
NUTS-region: Akershus 🏙️

Prosedyre
Prosedyretype: Åpen anbudskonkurranse
Tilbudstype: Innlevering for alle delkontrakter
Tildelingskriterier
Det mest økonomisk fordelaktige tilbudet

Oppdragsgiver
Identitet
Land: Norge 🇳🇴
Type tildelende myndighet: Departement eller annen nasjonal eller føderal myndighet
Navn på tildelende myndighet: Norges miljø- og Biovitenskapelige Universitet
Postadresse: Postboks 5003
Postnummer: 1432
Poststed: Ås
Kontakt
Internettadresse: https://www.nmbu.no/ 🌏
E-post: heikki.fjelldal@nmbu.no 📧
URL for dokumenter: https://tendsign.no/doc.aspx?UniqueId=afujfosenc&GoTo=Docs 🌏
URL for deltakelse: https://tendsign.no/doc.aspx?UniqueId=afujfosenc&GoTo=Tender 🌏

Referanse
Datoer
Sendt dato: 2020-02-27 📅
Innleveringsfrist: 2020-03-27 📅
Publiseringsdato: 2020-03-02 📅
Identifikatorer
Kunngjøringsnummer: 2020/S 043-102736
OJ-S-utgave: 43
Tilleggsinformasjon
Visma notice: https://opic.com/id/afujfosenc

Gjenstand
Anskaffelsens omfang
Kort beskrivelse:
The contracting authority
The Norwegian University of Life Science NMBU has a special responsibility for providing research and education that shall ensure the basis of existence for future generations. We provide knowledge for life and sustainability is rooted in everything we do. NMBU has 1 700 employees and 5 200 students and is organised in 7 faculties. NMBU currently has campuses at Ås and in Oslo. These 2 campuses shall be co-located from autumn 2020. NMBU also has a research centre in Sandnes.
Vis mer
NMBU's ethical guidelines state that the University must follow the UN's human rights and the ILO's core conventions for the entire value chain affected by a procurement. NMBU emphasises the perspective of sustainability in the organisation — also in relation to procurement processes. NMBU is a member of the Ethical Trading Initiative Norway.
Vis mer
See NMBU's websites for further information the University.
The objective and scope of the contract:
The procurement consists of a 5-axle abrasive waterjet cutter for preparation of varying materials and thickness. The procurement will include all necessary components for utilisation of the machine (for example control panel, sand supply system, high pressure units, cooling units, software, etc.). The delivery will include freight, delivery and installation at the specific site. Furthermore, the procurement includes necessary training for the operation of the machine. The procurement will be installed in a separate room with limited space and the solution must therefore be adapted to this. Considerations for any necessary noise reduction must be accounted for.
Vis mer
The complete description of the delivery is given in the requirement specification (Annex A)
Contract
The procurement will be regulated by the following contracts:
Standard contract for the purchase of goods.
The contracts will be developed in cooperation with the winner of the competition, based on the tender documentation and offer.
Groups
It is not possible to submit tenders for parts of the assignment, as it is not appropriate to divide this contract.
Important dates
The contracting authority has set up the following time frames for the process:
Activity
Date
Any site inspection/tender conference
Minutes from the site infection/tender conference
Deadline for questions about the competition documents: 20.3.2020
The deadline for the receipt of tenders: 27.3.2020, 12.00
Tender opening: 27.3.2020 (12.15)
Evaluation: 3.4.2020
Selection of tenderers and notification to tenderers: 3.4.2020
Deadline of the waiting period: 24.4.2020
Contract signing: 27.4.2020
Period which the tenderer is bound to keep open the tender: 27.8.2020
Procurement procedure.
The procurement will be implemented in accordance with the Public Procurement Act dated 17.6.2016 (LOA) and the Public Procurement Regulations (FOA) PPR 2016-08-12-974. part I and part III. A contract will be awarded in accordance with the open tender contest procedure, cf. the Public Procurement Regulations § 13-1 (1).
Vis mer
Negotiations are not allowed in this contest. Tenders cannot, therefore, be changed after the tender deadline has expired. Furthermore, attention is drawn to the fact that tenders that include significant deviations from the procurement documents shall be rejected in accordance with the Public Procurement Regulations § 24-8(1) (b). The contracting authority can reject tenders that contain deviations from the procurement documents, uncertainties, etc. that are not considered significant, cf. the regulation § 24-8(2) a.
Vis mer
The tenderer is therefore strongly encouraged to follow the instructions given in the tender documentation and annexes and in the event of ambiguity ask questions through Visma Tendsign's function for questions and answers.
Varighet: 48 måneder

Prosedyre
Rettslig grunnlag: 32014L0024
Tidspunkt for mottak av tilbud: 12:00
Språk som tilbud eller forespørsler om deltakelse kan sendes inn på: norsk 🗣️
Tilbudets gyldighetsperiode: 2020-08-27 📅
Dato for åpning av tilbud: 2020-03-27 📅
Tidspunkt for åpning av tilbud: 12:15

Oppdragsgiver
Identitet
Nasjonalt registreringsnummer: 969 159 570
Kontakt
Kontaktpunkt: Heikki Fjelldal
URL for dokumenter: https://tendsign.no/doc.aspx?UniqueId=afujfosenc&GoTo=Docs 🌏

Utfyllende informasjon
Klageinstans
Navn: Follo Tingrett
Poststed: Ski
Land: Norge 🇳🇴
Kilde: OJS 2020/S 043-102736 (2020-02-27)
Kunngjøring om tildeling av kontrakt (2020-04-24)
Gjenstand
Anskaffelsens omfang
Kort beskrivelse:
The procurement consists of a five-axle abrasive Waterjet Cutter for preparation of varying materials and thickness. The procurement will include all necessary components for utilisation of the machine (for example control panel, sand supply system, high pressure units, cooling units, software etc.). The procurement will be installed in a separate room with limited space and the solution must therefore be adapted to this.
Vis mer
Metadata for kunngjøring
Dokumenttype: Kunngjøring om tildeling av kontrakt

Prosedyre
Tilbudstype: Ikke aktuelt
Tildelingskriterier
Laveste pris

Oppdragsgiver
Identitet
Navn på tildelende myndighet: Norges miljø- og biovitenskapelige universitet

Referanse
Datoer
Sendt dato: 2020-04-24 📅
Publiseringsdato: 2020-04-27 📅
Identifikatorer
Kunngjøringsnummer: 2020/S 082-194660
Refererer til kunngjøring: 2020/S 043-102736
OJ-S-utgave: 82
Tilleggsinformasjon
Justification for cancellation We are sorry to announce that due to currency changes and subsequent cost changes to over budget, unfortunately we have to cancel this tender. The need has not changed, and if the currency situation or the financing basis changes positively, this tender can be published again. Visma notice: https://opic.com/id/afglwvmzex
Vis mer

Gjenstand
Anskaffelsens omfang
Kort beskrivelse:
The Contracting Authority
The Norwegian University of Life Science NMBU has a special responsibility for providing research and education that shall ensure the basis of existence for future generations. We provide knowledge for life and sustainability is rooted in everything we do. NMBU has 1700 employees and 5200 students and is organised in seven faculties. NMBU currently has campuses at Ås and in Oslo. These two campuses shall be co-located from autumn 2020. NMBU also has a research centre in Sandnes.
Vis mer
NMBU´s ethical guidelines state that the University must follow the UN´s human rights and the ILO´s core conventions for the entire value chain affected by a procurement. NMBU emphasises the perspective of sustainability in the organisation — also in relation to procurement processes. NMBU is a member of the Ethical Trading Initiative Norway.
Vis mer
The procurement consists of a five-axle abrasive Waterjet Cutter for preparation of varying materials and thickness. The procurement will include all necessary components for utilisation of the machine (for example control panel, sand supply system, high pressure units, cooling units, software etc.). The delivery will include freight, delivery and installation at the specific site. Furthermore, the procurement includes necessary training for the operation of the machine. The procurement will be installed in a separate room with limited space and the solution must therefore be adapted to this. Considerations for any necessary noise reduction must be accounted for.
Vis mer
Standard contract for the purchase of goods
Lot
Deadline for questions about the competition documents:
20 March 2020
The deadline for the receipt of tenders:
27 March 2020, 12.00
Tender opening
27 March 2020 (12.15)
Evaluation:
3 April 2020
Selection of tenderers and notification to tenderers:
Deadline of the waiting period:
24 April 2020
Contract signing:
27 April 2020
Period which the tenderer is bound to keep open the tender:
27 August 2020
The procurement will be implemented in accordance with the Public Procurement Act dated 17 June 2016 (LOA) and the Public Procurement Regulations (FOA) PPR 2016-08-12-974. part I and part III. A contract will be awarded in accordance with the open tender contest procedure, cf. the Public Procurement Regulations § 13-1 (1).
Vis mer
Negotiations are not allowed in this contest. Tenders cannot, therefore, be changed after the tender deadline has expired. Furthermore, attention is drawn to the fact that tenders that include significant deviations from the procurement documents shall be rejected in accordance with the Public Procurement Regulations § 24-8(1) b. The contracting authority can reject tenders that contain deviations from the procurement documents, uncertainties etc. that are not considered significant, cf. the Regulation § 24-8(2) a.
Vis mer
The tenderer is therefore strongly encouraged to follow the instructions given in the tender documentation and annexes, and in the event of ambiguity ask questions through Visma Tendsign's function for questions and answers.

Referanse
Tilleggsinformasjon
Justification for cancellation
We are sorry to announce that due to currency changes and subsequent cost changes to over budget, unfortunately we have to cancel this tender. The need has not changed, and if the currency situation or the financing basis changes positively, this tender can be published again.
Vis mer
Kilde: OJS 2020/S 082-194660 (2020-04-24)
Nye anskaffelser i relaterte kategorier 🆕
Relaterte søk 🔍
Produkter/tjenester:
Industrimaskiner Diverse maskineri til generelt og spesielt bruk Diverse spesialmaskiner Rørledningsutstyr Industriroboter