T3 Flesland Avinor 80311 Tray return System

Sweco AS

The scope of work includes proposal of design, manufacture, supply, installation, documentation, commissioning and testing of 8 airport security checkpoints with automatic tray return.
The solutions shall be based on:
— Modules shall be easy to re-configure when the security checkpoints has to go through changes due to new laws and regulations. This includes support for different kinds of X-ray machines for hand luggage, including future X-ray machines;
— Automatic tray return systems where:
1. The trays shall be distributed to several ‘preparation positions’ in front of the security checkpoint;
2. The trays shall easily be collected and returned from several ‘return stations’ at the end of the security checkpoint;
3. The security checkpoint should be able to be used in ‘manually mode’ if the automatic tray system is failing/not in operation:
— The automatic tray return system is area efficient, durable and easy to maintain;
— Visual design in accordance with a modern airport and the interior design of the New T3 Terminal Bergen Airport;
— High passenger throughput with an expectation to improve the current figures which are approximately 250 pax/h (for each security checkpoint);
— Cost efficient regarding requirement of human resources;
— Requirements for high reliability, based on long life and proven technical solution;
— High availability, with low down and repair times, and long lifetime cycles on wear parts.
The scope may include option for service and maintenance for 5 years.

Frist

Fristen for mottak av tilbud var 2016-08-12. Anskaffelsen ble publisert 2016-07-08.

Leverandører

Følgende leverandører er nevnt i tildelingsbeslutninger eller andre anskaffelsesdokumenter:

Hvem? Hva? Hvor?
Anskaffelseshistorikk
Dato Dokument
2016-07-08 Kunngjøring av konkurranse
2016-08-11 Tilleggsinformasjon
2016-11-30 Kunngjøring om tildeling av kontrakt
Kunngjøring av konkurranse (2016-07-08)
Gjenstand
Anskaffelsens omfang
Tittel: X-ray inspection equipment
Antall eller omfang:
The scope of work includes proposal of design, manufacture, supply, installation, documentation, commissioning and testing of 8 airport security checkpoints with automatic tray return.The solutions shall be based on:— Modules shall be easy to re-configure when the security checkpoints has to go through changes due to new laws and regulations. This includes support for different kinds of X-ray machines for hand luggage, including future X-ray machines.— Automatic tray return systems where:1. The trays shall be distributed to several ‘preparation positions’ in front of the security checkpoint;2. The trays shall easily be collected and returned from several ‘return stations’ at the end of the security checkpoint;3. The security checkpoint should be able to be used in ‘manually mode’ if the automatic tray system is failing/not in operation:— The automatic tray return system is area efficient, durable and easy to maintain;— Visual design in accordance with a modern airport and the interior design of the New T3 Terminal Bergen Airport;— High passenger throughput with an expectation to improve the current figures which are approximately 250 pax/h (for each security checkpoint);— Cost efficient regarding requirement of human resources;— Requirements for high reliability, based on long life and proven technical solution;— High availability, with low down and repair times, and long lifetime cycles on wear parts.
Vis mer
Metadata for kunngjøring
Originalspråk: engelsk 🗣️
Dokumenttype: Kunngjøring av konkurranse
Kontraktens art: Varer
Forskrift: Det europeiske økonomiske samarbeidsområdet (EØS), med deltakelse av GPA-land
Felles innkjøpsordliste (CPV)
Kode: Røntgenkontrollutstyr 📦

Prosedyre
Prosedyretype: Konkurranse med forhandling
Tilbudstype: Innlevering for alle delkontrakter
Tildelingskriterier
Det mest økonomisk fordelaktige tilbudet

Oppdragsgiver
Identitet
Land: Norge 🇳🇴
Type tildelende myndighet: Forsyningsenhet
Navn på tildelende myndighet: Sweco AS
Postadresse: Storetveitvegen 98
Postnummer: 5072
Poststed: Bergen
Kontakt
Internettadresse: http://www.avinor.no 🌏
E-post: leila.santana@inventura.no 📧

Referanse
Datoer
Sendt dato: 2016-07-08 📅
Innleveringsfrist: 2016-08-12 📅
Publiseringsdato: 2016-07-13 📅
Identifikatorer
Kunngjøringsnummer: 2016/S 133-240895
OJ-S-utgave: 133

Gjenstand
Anskaffelsens omfang
Kort beskrivelse:
The scope of work includes proposal of design, manufacture, supply, installation, documentation, commissioning and testing of 8 airport security checkpoints with automatic tray return.
The solutions shall be based on:
— Modules shall be easy to re-configure when the security checkpoints has to go through changes due to new laws and regulations. This includes support for different kinds of X-ray machines for hand luggage, including future X-ray machines;
— Automatic tray return systems where:
1. The trays shall be distributed to several ‘preparation positions’ in front of the security checkpoint;
2. The trays shall easily be collected and returned from several ‘return stations’ at the end of the security checkpoint;
3. The security checkpoint should be able to be used in ‘manually mode’ if the automatic tray system is failing/not in operation:
— The automatic tray return system is area efficient, durable and easy to maintain;
— Visual design in accordance with a modern airport and the interior design of the New T3 Terminal Bergen Airport;
— High passenger throughput with an expectation to improve the current figures which are approximately 250 pax/h (for each security checkpoint);
— Cost efficient regarding requirement of human resources;
— Requirements for high reliability, based on long life and proven technical solution;
— High availability, with low down and repair times, and long lifetime cycles on wear parts.
The scope may include option for service and maintenance for 5 years.
Antall eller omfang:
The scope of work includes proposal of design, manufacture, supply, installation, documentation, commissioning and testing of 8 airport security checkpoints with automatic tray return.
The solutions shall be based on:
— Modules shall be easy to re-configure when the security checkpoints has to go through changes due to new laws and regulations. This includes support for different kinds of X-ray machines for hand luggage, including future X-ray machines.
— Automatic tray return systems where:
1. The trays shall be distributed to several ‘preparation positions’ in front of the security checkpoint;
2. The trays shall easily be collected and returned from several ‘return stations’ at the end of the security checkpoint;
3. The security checkpoint should be able to be used in ‘manually mode’ if the automatic tray system is failing/not in operation:
— The automatic tray return system is area efficient, durable and easy to maintain;
— Visual design in accordance with a modern airport and the interior design of the New T3 Terminal Bergen Airport;
— High passenger throughput with an expectation to improve the current figures which are approximately 250 pax/h (for each security checkpoint);
— Cost efficient regarding requirement of human resources;
— Requirements for high reliability, based on long life and proven technical solution;
— High availability, with low down and repair times, and long lifetime cycles on wear parts.
Beskrivelse av opsjoner: The scope may include option for service and maintenance for 5 years.
Referansenummer: 80311 Tray return System
Utførelsessted
Hovedsted eller utførelsessted: Flesland, Norway.

Juridisk, økonomisk, finansiell og teknisk informasjon
Vilkår for deltakelse
Egnethet til å utøve yrkesvirksomheten:
Tax certificate;
Company Registration Certificate.
Økonomisk og finansiell stilling: Accounts 2014, 2015.
Teknisk og faglig kapasitet: Experience from similar contracts.
Kontraktutførelse
Innskudd og garantier som kreves: Will be in the tender documentation.
Hovedfinansieringsvilkår og betalingsordninger og/eller henvisning til relevante bestemmelser som regulerer dem: Will be in the tender documentation.

Prosedyre
Språk
Språk: engelsk 🗣️
Andre språk: Norwegian.

Oppdragsgiver
Identitet
Nasjonalt registreringsnummer: 974 086 905
Kontakt
Kontaktpunkt: Sweco AS
Leila Santana
Adresse til kjøperprofilen: https://kgv.doffin.no/ctm/Supplier/CompanyInformation/Index/3613 🌏
URL for dokumenter: https://kgv.doffin.no/ctm/Supplier/Documents/Folder/146331 🌏
Kilde: OJS 2016/S 133-240895 (2016-07-08)
Tilleggsinformasjon (2016-08-11)
Gjenstand
Metadata for kunngjøring
Dokumenttype: Tilleggsinformasjon

Referanse
Datoer
Sendt dato: 2016-08-11 📅
Innleveringsfrist: 2016-08-19 📅
Publiseringsdato: 2016-08-13 📅
Identifikatorer
Kunngjøringsnummer: 2016/S 156-284308
Refererer til kunngjøring: 2016/S 133-240895
OJ-S-utgave: 156
Kilde: OJS 2016/S 156-284308 (2016-08-11)
Kunngjøring om tildeling av kontrakt (2016-11-30)
Gjenstand
Anskaffelsens omfang
Totalverdi for anskaffelsen: 1 018 465 💰
Metadata for kunngjøring
Dokumenttype: Kunngjøring om tildeling av kontrakt

Prosedyre
Tilbudstype: Ikke aktuelt

Referanse
Datoer
Sendt dato: 2016-11-30 📅
Publiseringsdato: 2016-12-02 📅
Identifikatorer
Kunngjøringsnummer: 2016/S 233-425767
OJ-S-utgave: 233
Kilde: OJS 2016/S 233-425767 (2016-11-30)
Nye anskaffelser i relaterte kategorier 🆕
Relaterte søk 🔍
Produkter/tjenester:
Transportutstyr og hjelpeprodukter til transport Diverse transportutstyr og reservedeler Lufthavnsutstyr Bagasjehåndteringssystem Bagasjehåndteringsutstyr Kontroll-, sikkerhets- signal- og lysutstyr Kontroll-, sikkerhets- eller signalutstyr... Laboratorie-, optisk- og presisjonsutstyr... Apparatur til kontroll og prøving Ikke-medisinsk utstyr basert på...