Consultancy services for an adapted KVU for the Ocean Space Centre

Nærings- og fiskeridepartementet (the Ministry of Trade, Industry and Fisheries)

The project Ocean Space Centre is a planned extension and upgrade of the Marine Technology Centre at Tyholt in Trondheim. The centre is mainly currently owned by NTNU and it consists of MARINTEK and Norwegian Technology of Science and Technology (NTNU) c/o the Institute for Marine Technology (IMT).
The project has been under review since 2008. A choice of concept review (KVU) was carried out in 2011, which was quality assured by Metier and Møreforskning Molde in 2012 and 2013. A decision was made after this to continue with D-flex and an 0+ alternative, as well as further reviewing the alternative D-flex.
There is a need for further analyses of the D-flex alternative's feasibility and costs connected to its operation. NTNU and Marintek have also prepared an alternative concept, which must be further reviewed. This must also be updated and comparable analyses of the 0+ alternative. A detailed and cost calculation shall be made for the three alternatives, as well as a socio-economic cost calculation. Analyses and finds from the previous KVU and KS1 shall, to the degree it is possible, be continued, but they ought to be updated where necessary.
For further description see annex 1 of the contract (the contracting authority's description of the assignment).

Frist

Fristen for mottak av tilbud var 2016-01-25. Anskaffelsen ble publisert 2015-11-18.

Hvem?

• Nærings- og fiskeridepartementet (the Ministry of Trade, Industry and Fisheries)

Hva?

Hvor?

• Norge

Anskaffelseshistorikk

Dato	Dokument
2015-11-18	Kunngjøring av konkurranse

Kunngjøring av konkurranse (2015-11-18)
Gjenstand
Anskaffelsens omfang
Tittel: Feasibility study, advisory service, analysis
Antall eller omfang:

The framework for the assignment is the preparation of a total delivery of an adapted choice of concept review (KVU) from tenderers in accordance with the Ministry of Finance's scheme for quality assurance of major government investments. The KVU shall be designed in accordance with the prerequisites and chapter structure for KS1, which resulted from the Ministry of Finance's framework agreement from September 2015 for quality assurance of the choice of concept, as well as the governing documents and cost estimate for the chosen project alternative.At the present time, the assignment is estimated to have a value of 2-3 000 000 NOK excluding VAT. This is only an estimate and is not binding for the contracting authority.The consultant must in addition reckon on presenting the report to the Ministry of Trade, Industry and Fisheries twice, with the provisional results before the assignment has been completed and then with the final results when the KVU is handed over to the Ministry.Length:The assignment will start immediately after the contract has been signed and it will have an expected length of approx. 5-6 months.The final report shall be handed over to the contracting authority by 1.8.2016.

Metadata for kunngjøring
Originalspråk: engelsk 🗣️
Dokumenttype: Kunngjøring av konkurranse
Kontraktens art: Tjenester
Forskrift: Det europeiske økonomiske samarbeidsområdet (EØS), med deltakelse av GPA-land
Felles innkjøpsordliste (CPV)
Kode: Gjennomførlighetsstudie, rådgivningstjeneste, analyse 📦

Prosedyre
Prosedyretype: Åpen anbudskonkurranse
Tilbudstype: Innlevering for alle delkontrakter
Tildelingskriterier
Det mest økonomisk fordelaktige tilbudet

Oppdragsgiver
Identitet
Land: Norge 🇳🇴
Type tildelende myndighet: Departement eller annen nasjonal eller føderal myndighet
Navn på tildelende myndighet: Nærings- og fiskeridepartementet (the Ministry of Trade, Industry and Fisheries)
Postadresse: Pb 8090 Dep
Postnummer: 0032
Poststed: Oslo
Kontakt
E-post: torunn-julie.kielland@nfd.dep.no 📧

Referanse
Datoer
Sendt dato: 2015-11-18 📅
Innleveringsfrist: 2016-01-25 📅
Publiseringsdato: 2015-11-20 📅
Identifikatorer
Kunngjøringsnummer: 2015/S 225-410546
OJ-S-utgave: 225

Gjenstand
Anskaffelsens omfang
Kort beskrivelse:

The project has been under review since 2008. A choice of concept review (KVU) was carried out in 2011, which was quality assured by Metier and Møreforskning Molde in 2012 and 2013. A decision was made after this to continue with D-flex and an 0+ alternative, as well as further reviewing the alternative D-flex.

There is a need for further analyses of the D-flex alternative's feasibility and costs connected to its operation. NTNU and Marintek have also prepared an alternative concept, which must be further reviewed. This must also be updated and comparable analyses of the 0+ alternative. A detailed and cost calculation shall be made for the three alternatives, as well as a socio-economic cost calculation. Analyses and finds from the previous KVU and KS1 shall, to the degree it is possible, be continued, but they ought to be updated where necessary.

For further description see annex 1 of the contract (the contracting authority's description of the assignment).

Antall eller omfang:

At the present time, the assignment is estimated to have a value of 2-3 000 000 NOK excluding VAT. This is only an estimate and is not binding for the contracting authority.

The consultant must in addition reckon on presenting the report to the Ministry of Trade, Industry and Fisheries twice, with the provisional results before the assignment has been completed and then with the final results when the KVU is handed over to the Ministry.

Length:

The assignment will start immediately after the contract has been signed and it will have an expected length of approx. 5-6 months.

The final report shall be handed over to the contracting authority by 1.8.2016.

Referansenummer: 15/5738
Utførelsessted
Hovedsted eller utførelsessted: Oslo.

Juridisk, økonomisk, finansiell og teknisk informasjon
Vilkår for deltakelse
Egnethet til å utøve yrkesvirksomheten:

Qualification requirements:

Paid taxes and duties.

Documentation requirement:

— A certificate, not older than 6 months from the deadline for receipt of tenders, which verifies that the tenderer has fulfilled the obligations in relation to payment of taxes, social security contributions and VAT. The certificate can be ordered and obtained from Altinn by using a separate link on skatteetaten.no. If this is not possible, it can be ordered from the tax collector or the Norwegian Tax Administration. The certificate is electronically certified and is therefore not signed. For further information, see skatteetaten.no The certificate shall be enclosed with the tender in accordance with the outline given in the tender documents.

— Foreign tenderers must provide certificates from equivalent authorities to the Norwegian authorities.

Legally established company.

— Norwegian companies: Company Registration Certificate;

— Foreign companies: proof that the company is registered in a trade or business register as prescribed by the law of the country in which the service provider is established.

Økonomisk og finansiell stilling:

Qualification requirements:

Adequate economic and financial capacity to implement the assignment, in which amongst other things being creditworthy without any requirement for guarantees will be adequate.

Documentation requirement:

A credit rating with key figures from a certified credit rating company or other form of documentation to demonstrate that the requirement has been met.

Teknisk og faglig kapasitet:

Qualification requirements:

Tenderers must have carried out at least three deliveries in the last 3 years with relevance for this assignment. Relevant means concept assessments, estimations, uncertainty analyses and socio-economic analyses.

Documentation requirement:

— Reference list of the tenderer's contracts in the last 3 years that are of direct relevance for this assignment.

— The list shall include the contracting authority's name, information on the investment measure's size, a short account of what the contract included, the consultant assignment's size, date of execution, as well as what role the offered resources had in the contract, and a specification of any sub suppliers/collaboration partners. In addition references are to be given for at least three of the assignments.

— Tenderers must have sufficient professional expertise and capacity.

Description of the tenderer's professional competence and capacity, including a description of the tenderer's organisation, current staffing situation and any collaborating partners.

Qualification requirement:

Tenderers shall not have or have had connections to previous work for the KVU and KS1 in the project, which can place doubt on the tenderer's legal capacity.

Self-declaration.

Prosedyre
Språk
Andre språk: Norwegian.

Oppdragsgiver
Kontakt
Kontaktpunkt: Torunn Julie Kielland
Adresse til kjøperprofilen: https://kgv.doffin.no/ctm/Supplier/CompanyInformation/Index/1005 🌏
URL for dokumenter: https://kgv.doffin.no/ctm/Supplier/Documents/Folder/138023 🌏

Referanse
Identifikatorer
Referansenummer tildelt av oppdragsgiver: 15/5738
Kilde: OJS 2015/S 225-410546 (2015-11-18)

Nye anskaffelser i relaterte kategorier 🆕

Arkitekt-, konstruksjons-, ingeniør- og inspeksjonstjenester (>20 nye anskaffelser)

Arkitekt- og relaterte tjenester (20)

Arkitekt-, ingeniør- og planleggingstjenester (14)