Rail-mounted tool carrier / work machine

Antall eller omfang

Technical and functional solutionTechnical descriptionThe road- and rail-travelling tool-carrier shall meet the following minimum requirements:— Must be able to run on road and railGeneral. Vehicle:— Diesel operation with environmentally friendly engine. Waste-gas approved for tunnel operation is required.— Top speed road: ≥ 60 km/h— Min. 3 seats, including the driver— Based on a chassis with a short wheelbase— Tool hitches on front and rear— Delivered in accordance with EU requirements for registration of motor vehicles— Satisfies European standardsRail operation:— Gauge, 1000 mmo Option: Operate on both 1000 mm and 1435 mm gauges— Bogies with operations to run on rails— Motor capacity that can handleo The slope ratios on Gråkallbaneno Snow clearingo Wagon towing— Must be able to cope with GB's track geometry (curve radii)o Minimum turning radius of 20 metres. Desired: by 17 metres.— ATS-ready— Brake system designed such that it fails into a safe state— Fail-safe control (dead man's switch)— Emergency brake systemEquipment:— Fully insulated lift for working on the overhead wireo Extendible basket in the longitudinal directiono Capacity for 2 persons and equipmento Weight capacity 500 kg— Crane with good carrying capacity— Good load capacity— Flexibility regarding mounting of trailers and other equipment— Would like an option for the following equipment:o Snow clearingo Rail Grindingo Overhead wire drum— Other:o Rolling material shall not contain combustible materials.o Vehicle with mounted equipment must satisfy laws and regulations for use on trams, metros and suburban railways in Norway.o Service and maintenance based on the vehicle's make with a good, local service network.o User documentation in NorwegianTenderers are requested to provide a description of the carriage requirements for ongoing maintenance and use of spare parts. The tenderer must provide the necessary training in the use and maintenance of the work machine.