Raising/lowering bottom Sandnessjøen swimming pool

Alstahaug kommune

SPECIFICATIONS
-At the shallow end of the 25 metre swimming pool a raising/lowering bottom is to be assembled from long side to long side (12.5 metres), with a width of 8.5 metres.
-In addition a flap of 3.5 metres is to be assembled.
-Water depth from 0 to 110 cm.
-The construction height is to be given.
-There shall be two hatches for inspection in the bottom.
-Requirement for antiskid class C
-The bottom shall be able to be set with a slope of approx. 6 degrees
-The speed of the raising/lowering of the bottom is to be given
-The bottom shall be able to be locked at different levels
-The bottom shall tolerate a load of a minimum of 600 N/m2
-The delivery shall follow the European standard NS-EN 13451-11:2004 (Swimming pool equpment - part 11: Specific safety requirements and testing methods for height regulated swimming pool floors and mobile dividing jettys), and otherwise fulfil all the relevant rules and EU norms for swimming pools.
-All parts in the delivery shall consist of materials that tolerate the aggressive environment in a swimming pool
-The steel quality shall be at least equivalent to AISE 316L, with a Mo-content of a minimum of 2.5%
-The way to move the bottom must be precisely described, with information on what shall be fixed in the bottom and any castings in walls etc.
NOTE: To register your interest in this notice and obtain any additional information please visit the Doffin Web Site at http://www.doffin.no/Search/Search_Switch.aspx?ID=297904.

Frist
Fristen for mottak av tilbud var 2013-07-02. Anskaffelsen ble publisert 2013-06-19.

Hvem?

• • Alstahaug kommune

Hva?

• • Dreneringsutstyr › Utstyr til svømmebassenger